The chrome headlights supplied by Sylva are provided with steel supports to bolt directly to the rear upper rocker arm pivot bolts. It is recommended that a lock-to-lock test is performed on the steering to ensure satisfactorily clearance. Install a spacer beneath the headlamp as necessary

The wing mounted indicators are easy to fit. It is worth filing the lens to the profile of the wing radius so that when fitted it doesn’t split when tightened down. The wire goes through a hole beneath the light and will need to be extended to reach the chassis, it must be secured especially beneath the mudguard to stop it falling on the tyre. Side repeaters can be fitted to the forward lower scuttle.

The rear stop tail lights can fit to the outer engine cover by drilling suitable sized holes and riveting on. Adjacent to these stick the reflectors in place. A fog light will be needed and can be mounted on a bracket near the exhaust outlet on the offside of the car, make sure it is at least 100 mm. from the brake light. Provision must be made for the support of the number plate and its illumination light. Straps fabricated from aluminium strip around the silencer will provide support in conjunction with a length of alloy angle.